LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glass, Frames & Mechanisms) >> Glass, Frames And Mechanisms >> Diagnostic Procedures >> Glass, Frames And Mechanisms >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of damage and system integrity.
    VISUAL INSPECTION

    Mechanical Electrical
    • Window glass
    • Window regulator
    • Fuse(s)
    • Window motor
    • Loose or corroded electrical connector(s)
    • Switch
    • Circuit(s)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.
scientia non olet · About LEMON Manuals