LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Cooling (V8 5.0L Petrol/V8 S/C 5.0L Petrol)) >> Engine Cooling (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Removal And Installation >> Cooling Fan Motor And Shroud - V8 S/C 5.0L Petrol >> Removal

Cooling Fan Motor And Shroud - V8 S/C 5.0L Petrol: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Battery Disconnect and Connect information.
  2. Refer to Hood information.
  3. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  4. Raise and support the vehicle.
  5. Refer to Radiator Splash Shield information.
  6. Refer to Right Air Cleaner Outlet Intermediate Pipe information.
  7. Refer to Left Air Cleaner Outlet Intermediate Pipe information.
  8. Torque: 9 Nm
    GJ0025280
  9. See figure
    GJ0025281
  10. See figure
    GJ0025282
  11. See figure
    GJ0025283
  12. Torque: 25 Nm
    GJ0025284
  13. Torque: 30 Nm
    GJ0025285
  14. CAUTION: Make sure to protect the paintwork.
  15. Torque: 23 Nm
    GJ0025286
  16. See figure
    GJ0025287
  17. Torque: 7 Nm
    GJ0025288
  18. See figure
    GJ0025289