LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Cooling (V8 5.0L Petrol/V8 S/C 5.0L Petrol)) >> Engine Cooling (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Removal And Installation >> Coolant Pump - V8 5.0L Petrol >> Installation

Coolant Pump - V8 5.0L Petrol: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Install all the bolts finger tight before final tightening.
    CAUTION: Install new o-ring seals
    CAUTION: Make sure that the gaskets are correctly located.
    NOTE: Make sure correct alignment of the bearing is maintained when installing into the hub carrier.
    NOTE: Install new gaskets.
  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals