LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Coolant Pump - V8 S/C 5.0L Petrol >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. CAUTION:
    • Make sure that the gaskets are correctly located.
    • Install new o-ring seals
    • Install all the bolts finger tight before final tightening.
    NOTE: Install new gaskets.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals