LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Coolant Expansion Tank >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove the filler cap from the coolant expansion tank while the system is hot.
CAUTION:
  • Anti-freeze concentration must be maintained at 50%.
  • Correct installation of the Coolant expansion tank cap can be obtained by tightening the cap until an audible click is heard.
  1. Refer to: Cowl Vent Screen (Removal and Installation).
  2. G11508541

    Torque Specification: 23 Nm 

  3. WARNING: Release the cooling system pressure by slowly turning the coolant expansion tank cap a quarter of a turn. Cover the expansion tank cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction may result in personal injury.
    G11541327
  4. G11541254

    Torque Specification: 9 Nm 

  5. CAUTION: Be prepared to collect escaping fluids.
    G11301394
  6. G11301395
  7. G11541331
scientia non olet · About LEMON Manuals