Brake Pads - Vehicles With: High Performance Brakes (G1451635): Removal
WARNING:
Brake pads must be renewed in axle sets only, otherwise braking efficiency may be impaired.
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: Wheel and Tire (Removal and Installation).
Torque Specification: 10 Nm
-
WARNING: If the brake caliper piston seal is damaged a new brake caliper must be installed.CAUTION: Do not allow the brake caliper to hang on the brake hose.
Torque Specification: 28 Nm
Special Tool(s): 206-080, 206-081