Brake Disc - Vehicles With: Standard Brakes (G1073722): Removal
CAUTION:
Brake discs must be renewed in pairs.
Removal steps in this procedure may contain installation details.
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: BRAKE PADS - VEHICLES WITH: STANDARD BRAKES (G1073724) (REMOVAL AND INSTALLATION).
- Torque Specification: 103 Nm
- Remove the 2 clips.
- Clean the components mating faces.