LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- XK/X150 >> Hydraulic Brake Actuation >> Description And Operation >> Brake Pedal

Brake Pedal

G11511874

The brake pedal is mounted in a bracket attached to the rear side of the engine bulkhead. The bracket also contains the accelerator pedal. A clevis pin connects the brake pedal to the push rod of the brake booster.

The stoplamp switch is mounted in the brake pedal bracket and operated by the brake pedal. There are two switches in the stoplamp switch, which close when the brake pedal is pressed to output 'brake applied' signals. When closed, one switch connects a ground to the ECM (engine control module). The second switch connects battery power from the CJB (central junction box) to the:

scientia non olet · About LEMON Manuals