LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Convertible >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- XK/X150 >> Hydraulic Brake Actuation >> Brake Fluid Reservoir (G545950) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Clean the components.
  2. Install the brake fluid reservoir.
    • Install new brake fluid reservoir seals.
    • Tighten the Torx bolt to 6 Nm (4 lb.ft).
  3. Connect the low brake fluid warning indicator switch electrical connector.
  4. Bleed the brake system.

    For additional information, refer to: Brake System Bleeding (General Procedures).

  5. Install the air intake cover.
    • Carefully secure the clips.
scientia non olet · About LEMON Manuals