High Pressure Fuel Pump 1: Removal
WARNING:
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may ignite. Failure to follow these instructions may result in personal injury.
CAUTION:
Make sure that tools and equipment are clean, free of foreign material and lubricant.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS .
- Refer to:FUEL SYSTEM PRESSURE RELEASE - GTDI 2.0L PETROL/V6 S/C 3.0L PETROL/V8 5.0L PETROL/V8 S/C 5.0L PETROL (G1084829) .
- Refer to: BATTERY DISCONNECT AND CONNECT .
- Refer to: ENGINE COVER - V8 5.0L PETROL/V8 S/C 5.0L PETROL .
- Refer to: ENGINE OIL DRAINING AND FILLING .
- Refer to: FUEL INJECTION COMPONENT CLEANING .
-
CAUTION: Be prepared to collect escaping fluids.
- Refer to: AIR CLEANER RH .
-
CAUTION:
- Be prepared to collect escaping fluids.
- Make sure that all openings are sealed. Use new blanking caps.
-
CAUTION:
- Be prepared to collect escaping fluids.
- Make sure that all openings are sealed. Use new blanking caps.
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: ENGINE MOUNT RH .
- Refer to: GENERATOR - V8 S/C 5.0L PETROL .
-
NOTE: Engine shown removed for clarity.
-
NOTE: Engine shown removed for clarity.
-
NOTE: Engine shown removed for clarity.
-
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
-
CAUTION:
- Remove and discard the high-pressure fuel supply lines.
- Be prepared to collect escaping fluids.
- Make sure that all openings are sealed. Use new blanking caps.
NOTE: Engine shown removed for clarity. -
CAUTION: Be prepared to collect escaping fluids.
Loosen the Torx screws a turn each at a time.
-
CAUTION: Be prepared to collect escaping fluids.