DTC B100E-64: Video Input "A" - Signal plausibility failure: Action

NOTE: This DTC may be logged even though no fault condition is present and should be ignored unless the customer has reported an infotainment system concern. If the customer has reported an infotainment problem, clear the DTC and retest. Verify the customer concern prior to diagnosis

Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If the fault persists, refer to the electrical circuit diagrams and check the APIX2 circuit for open circuit
Using the Jaguar Land Rover approved diagnostic equipment, check the infotainment master controller for related DTCs and refer to the relevant DTC index