LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Transmission/Transaxle Cooling (V8 4.2L Petrol/V8 S/C 4.2L Petrol/V6 3.0L Petrol)) >> Transmission/Transaxle Cooling (V8 4.2L Petrol/V8 S/C 4.2L Petrol/V6 3.0L Petrol) >> Removal And Installation >> Transmission Fluid Cooler >> Installation

Transmission Fluid Cooler: Installation

WARNING: This page is about a different car, the 2010 Jaguar XF and 2009 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the transmission fluid cooler.
    GJ0005350
  2. Install the transmission fluid cooler retaining bracket.
    • Tighten to 20 Nm.
      GJ0022468
  3. Install the transmission fluid cooler.
    • Tighten to 10 Nm.
      GJ0005349
  4. Attach the transmission fluid cooler tubes.
    • Install new O-ring seals.
    • Tighten to 11 Nm.
      GJ0005347
  5. Using the special tool, attach the transmission fluid cooler coolant hose.
    GJ0004958
  6. Using the special tool, attach the transmission fluid cooler coolant hose.
    GJ0004958
  7. Install the splash shield.
    GJ0005346
  8. Carry out a transmission fluid level check. Refer to Transmission Fluid Level Check information.
  9. Install the air deflector. Refer to AIR DEFLECTOR (G1569045) information.
  10. Refill and bleed the cooling system. Refer to: Cooling System Draining, Filling And Bleeding
scientia non olet · About LEMON Manuals