Pinpoint Test B: Back Up Start - 10MY Onwards - Smart Key Not Found - Refer To Handbook
- B1: IGNITION MODE FAILS TO SWITCH ON
- In normal operation, pressing the start button for one second will cause the vehicle to enter the ignition mode. If the procedures below are followed the engine should crank
- For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
- On pressing the start button, smart key not found . When this warning is displayed the smart key should be brought into close proximity with the immobilize antenna unit. Hold the key in the location and press the start button again. If this process fails the first time, try repositioning the key around the immobilize antenna unit location, repeat the sequence again
Has the vehicle started?
- Yes : No further action required
- No : Contact dealer technical support
NOTE:- Conditions for starting in addition to pressing the start button are
- For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
- If the engine can be heard to crank there is no fault with the smart key
- If the locking pin is still engaged, turn the steering wheel to overcome the side load
- Start authorisation defined as Ignition functions, Steering column lock engagement, Engine immobilize and smart key authorisation