LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XFR-S >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Tank & Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250 >> Fuel Tank And Lines - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Fuel Pump And Sensor Unit (G1086686) >> Installation

Fuel Pump And Sensor Unit (G1086686): Installation

  1. CAUTION:
    • Take extra care not to damage the fuel tank level sensor float and arm.
    • Make sure the fuel pump and sender unit is correctly installed in to the retaining bracket in the fuel tank.
    NOTE: Make sure the locating tang is installed in the correct position.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals