Cooling Fan Motor And Shroud (G1085722): Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: Radiator Splash Shield (Front End Body Panels, Removal and Installation).
-
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
-
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
- Lower the vehicle.
- Refer to: Left Air Cleaner Outlet Pipe (Intake Air Distribution and Filtering - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).
- Refer to: Right Air Cleaner Outlet Pipe (Intake Air Distribution and Filtering - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).
- Refer to: Air Cleaner Outlet Pipe T-Connector (Intake Air Distribution and Filtering - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).
- Refer to: Right Air Cleaner (Intake Air Distribution and Filtering - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).
- Refer to: Left Air Cleaner (Intake Air Distribution and Filtering - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol, Removal and Installation).
Torque Specification: 9 Nm
Torque Specification: 7 Nm