Hydraulic Brake Actuation Brake Master Cylinder (G1055556): Removal

1. WARNING: Make sure to support the vehicle with axle stands.

   Raise and support the vehicle.

2. Remove the cowl vent screen.

   For additional information, refer to: Cowl Vent Screen (Front End Body Panels, Removal and Installation).

3. CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.

   Remove the brake fluid reservoir.

   For additional information, refer to: Brake Fluid Reservoir  (Removal and Installation).

4. Remove the brake booster vacuum line from the brake vacuum pump.

5. CAUTION: Make sure that all openings are sealed. Use new blanking caps.

   Disconnect the master cylinder brake pipes.

6. Release the fuse box.

Remove the brake master cylinder.