DTC B100A-62: Fuel Pump Authorization - Signal compare failure: Action

Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the power and ground connections to the central junction box and instrument cluster
Using the manufacturer approved diagnostic system, complete a CAN network integrity test. Refer to the applicable SYSTEM WIRING DIAGRAM(S) and check the CAN network between the central junction box and instrument cluster
Confirm correct central junction box/instrument cluster installed
Re - synchronize ID by reconfiguring the central junction box as a new module
Check CAN network for interference/electromagnetic compatibility related issues. Ensure that the vehicle is away from sources of electromagnetic interference prior to clearing DTCs and retesting