Removal And Installation: Removal
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
-
Refer to: Battery Disconnect and Connect
- Raise and support the vehicle.
- Refer to: Catalytic Converter RH
Torque Specification: 12 Nm
Torque Specification: 48 Nm
Torque Specification: 35 Nm
Torque Specification: 100 Nm
- Discard the gasket.
- Make sure that the position of the spacers is noted before removal of the manifold.
CAUTION:
Discard the bolt.
CAUTION:
Discard the bolts.
NOTE:
NOTE:
Do not disassemble further if the component is removed for access only.