LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine - V8 N/A 5.0L Petrol -- XK/X150) >> Engine - V8 N/A 5.0L Petrol >> Oil Pump >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11285222

    Lubricate and install the new O-ring seals.

  2. G11285224

    Torque Specification: 

    M8 25 Nm 

    M6 12 Nm 

  3. G11285225

    Lubricate and install a new O-ring seal.

  4. G11285226

    Torque Specification: 12 Nm 

  5. G11285219

    Torque Specification: 21 Nm 

    6. NOTE: Tsubaki timing drive only.
  6. G11285228

    Install the lower timing chain making sure the colored chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

    7. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: Tsubaki timing drive only.
  7. G11285217

    Torque Specification: 21 Nm 

    8. NOTE: INA timing drive only.
  8. G11285230

    Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

    9. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: INA timing drive only.
  9. G11285218

    Torque Specification: 21 Nm 

  10. Refer to: oil Pan Extension 
  11. Refer to: Battery Disconnect and Connect
scientia non olet · About LEMON Manuals