Removal And Installation: Installation
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Apply RTV sealant WSE-M4G323-A6 (Loctite 5901G) to the areas shown, and tighten the bolts within 7 minutes.
-
Torque Specification: 12 Nm
- Refer to: Engine Oil Level Sensor
CAUTION:
Make sure that the mating faces are clean and free of foreign material.
NOTE:
Tighten the bolts in the indicated sequence.