LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine - V8 N/A 5.0L Petrol -- XK/X150) >> Engine - V8 N/A 5.0L Petrol >> Oil Cooler >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect
    2. WARNING: Make sure to support the vehicle with axle stands.

  2. Raise and support the vehicle.

  3. Refer to: Intake Manifold 

  4. Refer to: Cooling System Partial Draining And Vacuum Filling
  5. G11285125
  6. G11285126
    7. CAUTION:
    • Be prepared to collect escaping oil.
    • Be prepared to collect escaping coolant.
  7. G11285127

    Torque Specification: 13 Nm 

    8. CAUTION: Make sure that these components are installed to the noted removal position.
    NOTE: Install a new gasket.
  8. G11285128
    9. CAUTION:
    • Make sure that these components are installed to the noted removal position.
    • Install new o-ring seals
  9. G11285129
scientia non olet · About LEMON Manuals