Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Install all the bolts finger tight before final tightening.
Make sure that the area around the component is clean and free of foreign material.
Install the new seals.

NOTE: Tighten the bolts in the indicated sequence.

Fig 1: Oil Cooler Bolt Tightening Sequence

Courtesy of OF JAGUAR

To install, reverse the removal procedure.