Removal And Installation: Removal
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Battery Disconnect and Connect (General Procedures).
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: Air Deflector (Front End Body Panels, Removal and Installation).
- Refer to: Catalytic Converter RH (Exhaust System - 5.0L, Removal and Installation).
-
CAUTION: Make sure that the mating faces are clean and free of foreign material.
Special Tool(s): 310-121
Torque Specification: 48 Nm