Removal And Installation: Installation
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION: Make sure that the mating faces are clean and free of foreign material.NOTE: Lubricate the O-ring seal with clean engine oil.
To install, reverse the removal procedure.
-
NOTE: For NAS vehicles only.
If required, carry out a short drive cycle.
Refer to: Powertrain Control Module (PCM) Short Drive Cycle Self-Test (General Procedures).