LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XK/X150) >> Electronic Engine Controls - V8 N/A 5.0L Petrol >> Fuel Rail Pressure Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to: Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions (General Information, Description and Operation).
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Fuel System Pressure Release - 5.0L (Fuel System - General Information, General Procedures).
  2. Refer to: Engine Cover - 5.0L (Interior Trim and Ornamentation, Removal and Installation).
  3. G11285512
  4. WARNING: Be prepared to collect escaping fluids.
    CAUTION: Make sure that all openings are sealed. Use new blanking caps.
    G11542156

    Torque Specification: 32 Nm 

scientia non olet · About LEMON Manuals