LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XK/X150) >> Electronic Engine Controls - V8 N/A 5.0L Petrol >> Engine Coolant Temperature Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  2. Refer to: Engine Cover - V8 5.0L Petrol/V8 S/C 5.0L Petrol (Interior Trim and Ornamentation, Removal and Installation).
  3. Refer to: Cooling System Partial Draining and Vacuum Filling (General Procedures).
  4. G11284958

    1. Lift the tang and rotate the engine coolant temperature (ECT) sensor counter-clockwise.

scientia non olet · About LEMON Manuals