DTC P0335-31: Crankshaft Position Sensor A Circuit - No signal: Action
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate electrical circuit wiring diagrams and check crankshaft position sensor circuit for short circuit to ground, short circuit to power, high resistance, disconnected
- Check and install new crankshaft position as required. Refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component