DTC B10AC-81: Cruise Control Switch - Invalid serial data received: Action
WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Clear the DTC and press all the steering wheel switches, re-check for DTCs. Refer to the appropriate electrical circuit wiring diagrams and check the speed control switch circuit for open circuit, short circuit to power, short circuit to ground, disconnected
- Check and install a new steering wheel module as required. Refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component