Pinpoint Test D: Twist In Webbing
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- D1: TWIST IN WEBBING
- Refer to section Removal And Installation section of the service information, remove any trim panels required to expose the D loop (anchor point)
- Twist the webbing back the correct way in the loop
- Pass the twist through the pillar loop or escutcheon as required
- Check for correct operation twice
Does the webbing move freely then retract correctly?
YES: Refer to Removal And Installation section of the service information, reinstall any trim panels, ensure there are no obstructions and the webbing does not catch or rub. No further action required
NO: Refer to Pinpoint Test E .