LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 S/C 5.0L Petrol -- XK/X150 >> Engine - V8 S/C 5.0L Petrol >> Oil Pump >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. NOTE: Lubricate and install the new O-ring seals.
    G11285222
  2. NOTE: Lubricate and install the new O-ring seals.
    G11285224

    Torque Specifications: 

    M8 25 Nm 

    M6 12 Nm 

  3. NOTE: Lubricate and install the new O-ring seals.
    G11285225
  4. G11285226

    Torque Specification: 12 Nm 

  5. G11285219

    Torque Specification: 21 Nm 

  6. NOTE: Tsubaki timing drive only.
    G11285228

    Install the lower timing chain making sure the colored chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

  7. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: Tsubaki timing drive only.
    G11285217

    Torque Specification: 21 Nm 

  8. NOTE: INA timing drive only.
    G11285230

    Install the lower timing chain making sure the colored chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

  9. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: INA timing drive only.
    G11285218

    Torque Specification: 21 Nm 

  10. Refer to: Oil Pan Extension 
  11. Refer to: Battery Disconnect and Connect
scientia non olet · About LEMON Manuals