LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 S/C 5.0L Petrol -- XK/X150 >> Engine - V8 S/C 5.0L Petrol >> Oil Cooler >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. CAUTION:
    • Install all the bolts finger tight before final tightening.
    • Make sure that the area around the component is clean and free of foreign material.
    • Install the new seals.
NOTE: Tighten the bolts in the indicated sequence.
Fig 1: Oil Cooler Mounting Bolts Tightening Sequence
GJ0012838Courtesy of OF JAGUAR CARS INC

To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals