| Front brake pad material nominal thickness |
13 mm (0.51 in) |
| Front brake pad material minimum thickness |
2 mm (0.08 in) |
| Rear brake pad material nominal thickness |
10.8 mm (0.43 in) |
| Rear brake pad material minimum thickness |
2 mm (0.08 in) |
| Front brake disc diameter - Vehicles with standard brakes |
355 mm (14.0 in) |
| Front brake disc diameter - Vehicles with high performance brakes |
380 mm (15.0 in) |
| New front brake disc nominal thickness - Vehicles with standard brakes |
32 mm (1.26 in) |
| New front brake disc nominal thickness - Vehicles with high performance brakes |
36 mm (1.42 in) |
| Worn front brake disc minimum thickness - Vehicles with standard brakes |
30 mm (1.18 in) |
| Worn front brake disc minimum thickness - Vehicles with high performance brakes |
34 mm (1.34 in) |
| Rear brake disc diameter - Vehicles with standard brakes |
326 mm (12.8 in) |
| Rear brake disc diameter - Vehicles with high performance brakes |
376 mm (14.8 in) |
| New rear brake disc nominal thickness - Vehicles with standard brakes |
20 mm (0.79 in) |
| New rear brake disc nominal thickness - Vehicles with high performance brakes |
26 mm (1.02 in) |
| Worn rear brake disc minimum thickness - Vehicles with standard brakes |
18 mm (0.72 in) |
| Worn rear brake disc minimum thickness - Vehicles with high performance brakes |
24 mm (0.94 in) |
| Maximum front brake disc runout (installed) |
0.075 mm (0.003 in) |
| Maximum rear brake disc runout (installed) |
0.09 mm (0.004 in) |
| Maximum front hub face runout (installed) |
0.015 mm (0.0006 in) |
| Maximum rear hub face runout (installed) |
0.025 mm (0.0009 in) |
| Front brake sliding caliper single piston diameter - Vehicles with standard brakes |
60 mm (2.36 in) |
| Front brake sliding caliper double piston diameter - Vehicles with high performance brakes |
42 mm (1.66 in) |
| Rear brake sliding caliper single piston diameter |
45 mm (1.77 in) |
| Front brake caliper bleed screw |
14 Nm (10 lb-ft) |
| Rear brake caliper bleed screw |
14 Nm (10 lb-ft) |