Pinpoint Test E: The Pedal Goes Down Fast

E1: ROAD TEST VEHICLE
1. Road test the vehicle and apply the brake pedal.
  Is the brake pedal effort and brake pedal travel normal?
  - Yes : Vehicle is OK.
  - No: GO to E2.
E2: CHECK BRAKE PEDAL TRAVEL-PRESSURIZE SYSTEM
1. Pump the brake pedal rapidly (five times).
  Does the brake pedal travel build up and then hold?
  - Yes : BLEED the brake system.
    Refer to: Brake System Bleeding - Vehicles Without: Carbon Ceramic Brakes (General Procedures). TEST the system for normal operation.
  - No: GO to E3.
E3: CHECK FOR BRAKE SYSTEM LEAKS
1. Check for external brake system leaks. For additional information, refer to BRAKE MASTER CYLINDER component test.
  Are leaks found?
  - Yes : REPAIR as necessary, ADD fluid and BLEED brake system.
    Refer to: Brake System Bleeding - Vehicles Without: Carbon Ceramic Brakes (General Procedures). TEST the system for normal operation.
  - No : System is OK.