LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Front End Body Panels -- XK/X150 >> Front End Body Panels >> Cowl Vent Screen (G528245) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the plenum chamber panel.
    • Connect the washer jet hose.
    • Carefully secure the clips.
  2. Install the air intake cover.
    • Carefully secure the clips.
  3. Install the brake master cylinder cover.
    • Carefully secure the clips.
  4. Install the windshield wiper arms.

    For additional information, refer to: Wiper Pivot Arm (Removal and Installation).

scientia non olet · About LEMON Manuals