Description And Operation: General
- If water leaks occur after bodywork repairs, the cause can be established using the checks described below. A systematic and logical procedure is required to locate water leaks. Before beginning extensive checks, a thorough visual inspection must be carried out.
- Visual Inspection
- The following characteristics may indicate existing leaks:
- Check the clearance and accurate fit of ancillary components such as the hood, tailgate, liftgate, doors, and so on.
- Check for correct fit and possible damage to sealing elements such as blanking plugs, rubber door seals, and so on.
- Check water drain holes for unhindered flow.
- Various tests can be used to provide further information on possible leaks:
- Water test
- Washer test
- Road test
- Chalk (powder) test