LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XKR 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Speakers -- XK/X150 >> Speakers >> Subwoofer Speaker >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the subwoofer speaker housing.
    • Install the brackets.
    • Install the screws.
    • Tighten the nuts to 5 Nm (4 lb.ft).
    • Tighten the bolts to 10 Nm (7 lb.ft).
  2. Connect the subwoofer speaker housing electrical connectors.
    • Connect the MOST connector.
  3. Install the amplifier.
  4. Install the subwoofer.
    • Connect the electrical connectors.
    • Install the screws.
  5. Install the subwoofer cover.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    6. CAUTION: Make sure the carpet is correctly installed and that no foul - condition exists when the accelerator pedal is depressed.

  6. Install the carpet.

  7. Install the heater duct.
    • Install the Torx screws.
    • Install the lampholder.
  8. Install the instrument panel assembly.

    For additional information, refer to: Instrument Panel

scientia non olet · About LEMON Manuals