LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XK 2D Convertible >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- XK/X150 >> Power Brake Actuation >> Brake Booster - LHD RWD (G546437) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install new gaskets.
  2. Install the brake booster.
    • Tighten the nuts to 25 Nm (18 lb.ft).
    • Install the brake pedal clevis pin.
  3. Connect the vacuum hose.
  4. Install the brake switch.
  5. Install the driver's side footwell trim panel.
    • Carefully align and secure the clips.
  6. Install the brake master cylinder.

    For additional information, Refer To: Brake Master Cylinder - LHD (Removal and Installation).

scientia non olet · About LEMON Manuals