LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XJ L >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Fuel Tank & Lines - V6 S/C 3.0L Petrol -- XJ/X351) >> Fuel Tank And Lines - V6 S/C 3.0L Petrol >> Removal And Installation >> Fuel Tank Filler Pipe (G1267370) >> Removal

Fuel Tank Filler Pipe (G1267370): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: PETROL AND PETROL-ETHANOL HEALTH AND SAFETY PRECAUTIONS .
  2. Refer to: Battery Disconnect and Connect (General Procedures).
  3. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  4. G11283757

    Torque Specification: 128 Nm 

  5. G11292708
  6. WARNING: The fuel tank filler inlet is fitted with a non return valve. When removing the flexible filler hose a small amount of fuel will escape, if this is more than 0.5L refit the filler pipe and drain the fuel tank using suitable equipment.
    NOTE: This step is for information only.
    G11292682
  7. G11292683

    Torque Specification: 3 Nm 

  8. G11292684

    Torque Specification: 9 Nm 

  9. G11292685

    Torque Specification: 9 Nm 

  10. G11292686
  11. G11292687
scientia non olet · About LEMON Manuals