Glove Compartment (G1267528): Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
CAUTION: Take extra care not to damage the edges of the component.
-
CAUTION: Take extra care not to damage the edges of the component.
Torque Specification: 2 Nm
-
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
-
CAUTION: LH illustration shown, RH is similar.
Torque Specification: 2.5 Nm
Torque Specification: 9 Nm
Torque Specification: 2.5 Nm
-
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Do not disassemble further if the component is removed for access only.
-
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
Torque Specification: 2 Nm
Torque Specification: 2 Nm