Front Muffler (G1086744): Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING:
- Make sure to support the vehicle with axle stands.
- Observe due care when working near a hot exhaust system.
Raise and support the vehicle.
- Refer to: Engine Rear Undershield (Front End Body Panels, Removal and Installation).
Torque Specification: 55 Nm
Torque Specification: 55 Nm
-
CAUTION: Make sure that the exhaust system is supported with suitable retaining straps.
-
CAUTION: Make sure that the exhaust system is supported with suitable retaining straps.