Timing Cover: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to Battery Disconnect and Connect information.
- Raise and support the vehicle.
- Refer to ACCESSORY DRIVE BELT (G1085774) information.
- Refer to ACCESSORY DRIVE BELT TENSIONER (G1085778) information.
- Refer to THERMOSTAT HOUSING (G1085730) information.
- Refer to: Valve Cover LH .
- Refer to: Valve Cover RH .
- Refer to: Crankshaft Pulley .
- See figure
- See figure
- See figure
- See figure
WARNING:
Make sure to support the vehicle with axle stands.
NOTE:
Engine shown removed for clarity.
NOTE:
Engine shown removed for clarity.
NOTE:
Engine shown removed for clarity.
NOTE:
Engine shown removed for clarity.