LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XF Supercharged >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> Rear Drive HALFSHAFTS -- XF/X250 >> Rear Drive HALFSHAFTS >> Removal And Installation >> Outer Constant Velocity (CV) Joint Boot (G1029572) >> Installation

Outer Constant Velocity (CV) Joint Boot (G1029572): Installation

  1. CAUTION: Only use lubricants meeting the Jaguar specification.
    NOTE: Make sure that the protective sleeve is correctly installed, prior to installing the CV joint boot.
    G11420860

    Fill the CV joint with 50 grams of grease.

    Fill the CV joint boot with 85 grams of grease.

  2. CAUTION: Make sure enough air is present in the CV boot.
    NOTE: Install new retaining clips.
    G11420861
scientia non olet · About LEMON Manuals