Inner Constant Velocity (CV) Joint Boot (G1029571): Removal

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
Remove the rear halfshaft.
For additional information, refer to: Rear Halfshaft - GTDi 2.0L Petrol/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (Removal and Installation).
CAUTION: Use suitable protective covers to protect the halfshaft.

Using a suitable clamp, secure the rear halfshaft.
CAUTION: Make sure the inner constant velocity (CV) joint is not separated from the halfshaft.

Remove and discard the inner CV joint boot retaining clip.
CAUTION: Make sure the CV joint ball bearings do not drop out of the CV joint.

Using a suitable tool, remove the inner CV joint.
Remove the inner CV joint boot.

Remove and discard the retaining clip.