Brake Vacuum Pump - V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G1208555): Removal

CAUTION: Make sure that all openings are sealed. Use new blanking caps.

NOTE: Removal steps in this procedure may contain installation details.

WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.
Refer to: Engine Oil Draining And Filling (G1187297) (General Procedures).
CAUTION: Be prepared to collect escaping oil.

Torque Specification: 12 Nm
NOTE: Remove and discard the O-ring seal.