LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XF Supercharged >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses -- XF/X250 >> Description And Operation >> Wiring Harnesses >> Electrical Wiring Harness Repair >> Approved Electrical Wiring Harness Repair Methods >> Two Wire Splice Repair

Two Wire Splice Repair

To repair wiring harnesses with damaged eyelets, use a splice connector with a suitable pre-terminated lead with the appropriate eyelet and wire size.

NOTE:
  • If the damaged eyelet is from an interlocking pair, it is recommended to replace both eyelets.
  • If any harness(s) with large multi wire ground eyelets give cause for concern, new components must be installed.

If the wiring harness has a damaged eyelet with two wires to the eyelet, it is recommended to use a suitable pre-terminated lead with a cross sectional area equal to or greater than that of the 2 wires combined to complete the repair.

scientia non olet · About LEMON Manuals