Pinpoint Test A: Single Door Will Not Open From The Outside (But Opens From The Inside)

1. A1: CHECK THE EXTERIOR DOOR RELEASE CABLE TO EXTERIOR DOOR HANDLE IS INSTALLED CORRECTLY 
   1. Remove the door trim panel as necessary
   2. Confirm the exterior door release cable is correctly installed to the exterior door handle

   Is the cable correctly installed?

   • Yes  : GO to  A2.
   • No  : Connect the door release cable correctly. If the cable is damaged, install a new door release cable  . Test the system for normal operation
2. A2: CHECK THE EXTERIOR DOOR HANDLE RELEASE CONNECTION TO THE DOOR LATCH 

1. Confirm the exterior door handle release connection to the door latch is installed correctly

Is the exterior door handle release cable installed correctly?

• Yes  : GO to Pinpoint Test C .
• No  : Connect the door release cable correctly. If the cable is damaged, install a new door release cable  . Test the system for normal operation