LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2012 >> XF Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XF/X250 >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Coolant Expansion Tank (G1085721) >> Removal

Coolant Expansion Tank (G1085721): Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect (Battery, Mounting and Cables, General Procedures).
  2. Using a syringe, remove the cooling fluid from the expansion tank.
  3. CAUTION: Take extra care not to damage the component.
    G11418589

    Torque Specification: 7 Nm 

  4. G11418590
  5. CAUTION: Note the fitted position of the component prior to removal.
    NOTE:
    • Do not disassemble further if the component is removed for access only.
    • Make sure that the component is installed to the position noted on removal.
    G11418591
scientia non olet · About LEMON Manuals