LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Convertible Top -- XK/X150) >> Convertible Top >> Convertible Top Compartment Lid Moulding >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the convertible top compartment moulding.
    • Tighten the nuts to 4 Nm (3 lb.ft).
  2. Install the convertible top compartment lid pad.
    • Secure with the clips.
  3. Install the convertible top compartment lid buffers.
    • Release the clips.
    • Secure in the clips.
  4. Close the convertible top compartment lid.
    • Remove the support.
    • Depress the switch.
scientia non olet · About LEMON Manuals