Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Install the convertible top compartment lid lift cylinder.
- Secure with the clip.
Install the convertible top compartment lid lift cylinder cover.
- Attach the lift cylinder.
- Secure with the clip.
Secure the convertible top compartment lid lift cylinder.
- Connect the 2 fluid lines.
- Connect the electrical connector.

NOTE: Support as necessary.

Close the convertible top compartment lid.
- Raise the rear of the convertible top.

NOTE: The ignition must be switched off.

Tighten the convertible top system pressure Allen bolt.
- Tighten to 2 Nm.
Cycle the convertible top to bleed the hydraulic system.
Check the convertible top fluid level.
Install the convertible top hydraulic pump access panel
- Secure in the clip.