LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Convertible Top -- XK/X150) >> Convertible Top >> Convertible Top Compartment Lid Latch >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the convertible top latch release cable.
    • Tighten the Torx bolt.
    • Install the clip.
  2. Secure the convertible top lid position switch.
    • Attach the switch.
    • Tighten the Torx bolts.
  3. Secure the convertible top lid latch.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    4. NOTE: Support as necessary.

  4. Close the convertible top compartment lid.

scientia non olet · About LEMON Manuals